#ifndef TINIBIOS_H

#define TINIBIOS_H

#include <ds80c390.h>
#include <time.h>

void Serial0Init (unsigned long baud, unsigned char buffered);
char Serial0GetChar(void);
void Serial0PutChar(char);
char Serial0CharArrived(void);
void Serial0Baud(unsigned long baud);
void Serial0SendBreak(void);
void Serial0Flush(void);

void Serial0SwitchToBuffered(void); // ds400 only.

void Serial1Init (unsigned long baud, unsigned char buffered);
char Serial1GetChar(void);
void Serial1PutChar(char);
char Serial1CharArrived(void);
void Serial1Baud(unsigned long baud);
void Serial1SendBreak(void);
void Serial1Flush(void);

unsigned long ClockTicks();
void ClockMilliSecondsDelay(unsigned long ms);
void ClockMicroSecondsDelay(unsigned int us);

#define SERIAL_0_BAUD 115200L
#define SERIAL_1_BAUD 9600L

// these need to be binary numbers
#define SERIAL_0_RECEIVE_BUFFER_SIZE 1024
#define SERIAL_1_RECEIVE_BUFFER_SIZE 64

// I know someone is fooling with the crystals
#if defined(SDCC_ds400)
# define OSCILLATOR 14745600L
#else
# define OSCILLATOR 18432000L
#endif

/* Set the cpu speed in clocks per machine cycle, valid values are:
   1024: Divide-by-1024 (power management) mode (screws ALL timers and serial)
      4: Standard 8051 divide-by-4 mode
      2: Use 2x xtal multiplier
      1: Use 4x xtal multiplier (Don't do this with a TINI at 18.432MHz)
*/
#define CPU_SPEED 2
void CpuSpeed(unsigned int speed);

// The MOVX stretch cycles, see datasheet
#define CPU_MOVX_STRETCH 0x01

// from rtc390.c
#define HAVE_RTC
unsigned char RtcRead(struct tm *rtcDate);
void RtcWrite(struct tm *rtcDate);

// from lcd390.c
extern void LcdInit(void);
extern void LcdOn(void);
extern void LcdOff(void);
extern void LcdClear(void);
extern void LcdHome(void);
extern void LcdGoto(unsigned int collumnRow);
extern void LcdPutChar(char c);
extern void LcdPutString(char *string);
extern void LcdLPutString(unsigned int collumnRow, char *string);
extern void LcdPrintf(const char *format, ...) __reentrant;
extern void LcdLPrintf(unsigned int collumnRow, const char *format, ...) __reentrant;

// from i2c390.c
#define I2C_BUFSIZE 128
extern char I2CReset(void);
extern char I2CStart(void);
extern char I2CStop(void);
extern char I2CSendStop(char addr, char count,
			char send_stop);
extern char I2CReceive(char addr, char count);
extern char I2CSendReceive(char addr, char tx_count,
			   char rx_count);
//extern char I2CByteOut(char);
//extern void I2CDumpError(char);

/* global transfer buffers */
extern char i2cTransmitBuffer[I2C_BUFSIZE];
extern char i2cReceiveBuffer[I2C_BUFSIZE];

// Macro for normal send transfer ending with a stop condition
#define I2CSend(addr, count)   I2CSendStop(addr, count, 1)


// internal functions used by tinibios.c
unsigned char _sdcc_external_startup(void);
void Serial0IrqHandler (void) __interrupt 4;
void Serial1IrqHandler (void) __interrupt 7;

#if !defined(SDCC_ds400)
void ClockInit();
void ClockIrqHandler (void) __interrupt 1 __naked;
#endif

#if defined(SDCC_ds400)
// functions for dealing with the ds400 ROM firmware.

// A wrapper which calls rom_init allocating all available RAM in CE0
// to the heap, sets the serial port to SERIAL_0_BAUD, sets up the
// millisecond timer, and diddles the clock multiplier.

// Values for the romInit "speed" parameter.
#define SPEED_1X	0 /* no clock multiplier, normal speed. */
#define SPEED_2X	1 /* 2x clock multiplier. */
#define SPEED_4X	2 /* 4x clock, DOESN'T WORK ON TINIm400! */

unsigned char romInit(unsigned char noisy,
		      char speed);

// Install an interrupt handler.
void installInterrupt(void (*isrPtr)(void), unsigned char offset);
#endif


#endif /* TINIBIOS_H */