README.TXT for the EVM5630x-Win (MS-Windows 3.1) Revision history: 3.23 07/12/99 Fix patch for 362 interrupt problem (tmp brkp error) 3.21 06/04/99 Fix disassembly of LRA xxxx,D 3.20 05/17/99 Fix attribute processing in IEEE-695 3.16 04/15/99 Terminate INPUT if EOF reached 3.15 04/15/99 Fix HW breakpoint from command line (56300/56600) 3.14 01/26/99 Fix LMEM load for IEEE-695 files 3.12 11/30/98 Process optional attributes 37..55 for IEEE-695 3.11 10/22/98 Fix 56307 IO registers decoding (EFCOP) 3.10 10/21/98 Do not read M0, SR regs on initialization, if DSP is running 3.05 08/18/98 Add error codes during Evm init 3.00 08/12/98 Restore core registers registers before reset Add horizontal scroll to Load Modules dialog Swap XMEM and YMEM for LMEM sections in IEEE-695 Close COM port if init fails 2.61 07/22/98 Fix IO window for 56362 2.60 07/21/98 Fix Watch display and editing (Trap D) 2.59 07/14/98 Fix reading of the PC value (corrupted pointer) 2.58 07/10/98 Add memory space cast for WATCH (Ex.: (X:)(*(&varName+2))) 2.57 07/06/98 Fix TrapD during application reload 2.56 07/01/98 Fix LMEM loading and symbol references for IEEE-695 06/30/98 Support for 16-bit compatibility mode. 2.55 05/27/98 Add I/O symbols for 56362 2.54 05/13/98 Fix near symbols for IEEE-695 2.53 05/07/98 Simple Hw break support for the BREAK command 2.52 05/06/98 Add memory COMPARE command 2.51 04/18/98 Fix decimal input conversion for 24-bit targets 2.50 04/18/98 Fix end of file display in mixed-mode for IEEE-695 (ABS) 2.48 04/16/98 Fix INPUT command processing 2.47 04/13/98 Fix segment type assignment for Tasking C 2.46 04/02/98 Fix reverse ascii display for 24-bit 2.45 04/01/98 Fix disasm of MOVEP longEA 2.44 03/30/98 Support for DSP56362EVM 2.43 03/18/98 Add BRKcc to PC fixup table 2.42 03/05/98 Support for DSP56307EVM 2.41 01/22/98 Refix conditional jump (Jcc/JScc ea) - adds 2 to PC instead of 1 2.40 01/21/98 Fix conditional jump (Jcc/JScc ea) 2.39 01/20/98 Fix disassembly of ASL S1,S2,D (S2 bad) 2.38 01/16/98 Fix conditional jump (add BSCLR/BSSET to condition table) 2.37 12/17/97 SAVE command was truncating address bits (read OK) 2.36 12/15/97 Do not display data when window is minimized 2.35 12/05/97 Do not mask address to 16-bit for INPUT/OUTPUT commands 2.33 11/17/97 Change color saving procedure, add GOCURS command (for alias) 2.32 11/11/97 Fix conditional jump for 56300, dpy address for .LOD load 2.29 10/08/97 Fix mixed mode display, memory free after cld load 2.26 09/24/97 Fix memory overwrite during IEEE-695 load 2.23 09/02/97 Add DMA to HW breakpoint (use L:xxxx address) 2.22 08/21/97 Fix ASM of MOVEP for 56300, fix INPUT command fopen attr Add delay during baud-rate change 2.21 08/18/97 Fix address parsing for INPUT/OUTPUT commands 2.20 08/05/97 Change source line processing for .abs files (IEEE-695) 2.19 05/12/97 Fix disassembly bug (MOVEP X:qq,X:EA) 2.18 05/06/97 Recognize memory spaces for IEEE-695 loader Initialize with mono colors (override with -m to old colors) 2.17 04/29/97 Fix Tab Size setting procedure (restore on startup) 2.16 04/25/97 Fix graphics data display routine. Add graphics mode cursor (Toggled with the Insert key within data window) Disable 56002 SCLK output after bootstrap of the firmware. 2.15 04/22/97 Change scrolling proc of the DATA window in the graphics mode. 2.14 04/18/97 Modify Color Setup. Default MONO (-m) has black text on white. Add querry before saving setup on exit (enable with -x option) 2.13 04/17/97 Modify procedure displaying disassembly window (buffer test) (can not read PRAM after conditional jump within DO loop) 2.12 04/15/97 Fix bug in source level of assembly module 2.11 04/14/97 Fix 16-bit mode processing of the ALU registers 2.09 03/31/97 Do not set 16-bit data mode (DSP5630x graphical display) 2.06 03/05/97 Fix in IEEE-695 debug info processing (enumeration) 2.03 03/03/97 Fix IEEE-695 debug info processing 2.02 02/28/97 Support for g563c "stack frame" (DSP56300 C compiler) 2.01 01/22/97 Fix address display for 56300 in SAVE command 1.97 01/10/97 Fix source level in Tasking, check for conditional jump (opcode) 1.96 01/07/97 Fix single stepping through IEEE-695 source (Tasking) 1.95 12/23/96 Fix PC value display after breakpoint at and of the DO loop Update LC value for breakpoints around end of the DO loop 1.94 12/19/96 Do not display ERROR message if DBGINIT.CMD not found 1.93 12/16/96 Add UNTIL command - "GO address" replaces PC value 1.92 12/13/96 Add level 0 to 56300 stack display 1.90 12/11/96 Fix extended stack access, fixup address of Jcc etc. 1.89 12/10/96 Add MAP command - controlled memory access 1.88 12/10/96 Fix source mode display for single line sections 1.86 12/05/96 Firmware change (faster memory transfers) 1.85 11/21/96 Fix IEEE loader for "constant" directive 1.84 11/20/96 Fix symbol processing in the disassembly window. 1.83 11/13/96 Add "counter" option to the JUMP command Fix Force B operation in single step mode Change help file name to EVM5630x.HLP 1.82 11/12/96 Fix symbols load (index limited to 16 bits) 1.81 11/06/96 Fix endless loop during symbol load 1.80 10/30/96 Fix WATCH remove option 1.78 10/24/96 Fix memory overrun in MACRO & fix "SYMBOL name" command 1.76 10/21/96 Modify HW break dialog 1.75 10/14/96 Modify register display for 16-bit artihmetic mode 1.74 09/27/96 Add processing of static symbols to the watch window 1.72 09/18/96 Fix address parsing in inline assembler 1.71 09/11/96 Fix HW break range, add C_STAT symbols to the symbol table 1.69 07/29/96 Fix mixed mode display line/address reference (BRKP) 1.68 07/16/96 Change IDCODE read procedure (FW patch) 1.67 07/11/96 Fix WATCH conversion from REGISTER 1.66 07/09/96 Add IO registers for the DSP56303 1.65 07/05/96 Change to BC 4.53 (new DLL for distribution) 1.64 07/01/96 Finish symbols display, fixes to WATCH vars 1.62 06/20/96 Fix disassembly of LSR #n,A Fix problem with cursor after load error Add display of file name during load 1.61 06/10/96 Initial release ********************************************************************** *** *** *** We would appreciate your suggestions, and please notify us of *** *** any problems. Thank You. *** *** *** *** *** *** Domain Technologies, Inc. Tel.: (972) 578-1121 *** *** 1700 Alma Dr., #495 Fax: (972) 578-1086 *** *** Plano, Texas 75075 *** *** *** *** E-mail: support@domaintec.com *** *** WWW: http://www.domaintec.com *** *** FTP: ftp://ftp.domaintec.com/domtech *** *** *** **********************************************************************